One RSA Unable to PXE Boot
We have 3 RSAs in our environment along with the primary server. The primary and 2 RSAs function normally. The third RSA does not PXE boot.
The boot process reports:
NBP filename is ipxe.efi
NBP filesize is 687464 Bytes
Downloading NBP file...
It waits a bit and then shows No Bootable Device.
The RSA is a VM. The terminal shows:
(da0:mpt0:0:0:0): CAM status: CCB request terminated by the host
Any assistance would be much appreciated. We're completely unable to image devices at this location.
Thanks.
Answers (3)
Top Answer
Turns out to be an internal networking issue.
Thanks for the help.
I would suggest that you sync a working KBE across to that RSA again, and then set that as the default.
Remember however that this may be a drivers issue, so the hardware you are trying to boot to the network may not have drivers in the KBE on that RSA
I've deleted and resynced the system image and the KBE, but it still will not boot.
I can successfully boot to the same model computer at other locations so it shouldn't be a driver issue.
Any other suggestions would be appreciated.
